国产99久久亚洲综合精品,啦啦啦视频在线观看www

TranslationMobile

裝料工具

"loading" in Chinese : n. 1.裝貨。 2.裝載量；重量；載荷；(船只等的)貨 ...
"fixture" in Chinese : n. 1.固定，固定狀態；固定物；【機械工程】裝置器，工 ...
"fixture" in Chinese : n. 1.固定，固定狀態；固定物；【機械工程】裝置器，工件夾具。 2.〔 p ...
"t-fixture" in Chinese : 丁字形夾具; 形夾具
"plumbing fixture, fixture" in Chinese : 衛生器具
"plumbing fixture,fixture" in Chinese : 衛生器具
"loading" in Chinese : n. 1.裝貨。 2.裝載量；重量；載荷；(船只等的)貨載。 3. 填充物 ...
"no loading" in Chinese : 不停車載客
"t loading" in Chinese : 載重汽車荷載
"t-loading" in Chinese : 載重汽車荷載
"additional fixture" in Chinese : 固定附
"air fixture" in Chinese : 通風裝置
"airflow fixture" in Chinese : 空氣流量測試夾具
"alignment fixture" in Chinese : 校準定位臺
"assembly fixture" in Chinese : 裝配夾具; 裝配架; 裝配設備

Examples

The loading fixture shown in fig. 6. 5 is of the fixed-grip design, utilizing a wedging system capable of hand-generated loads up to 2. 5 tons .
圖65所示的加載的夾具具有固定夾頭裝置，它利用了一個手動操作載荷可達到25噸的楔形系統。
The particular advantage of the compliance measurement method is that the loading fixtures used can be identical to those needed for fracture tests or crack-propagation tests of materials .
柔度測量法的特殊優點是可以使用材料斷裂試驗或裂紋擴展所用的加載夾具。
The loading fixture shown in fig . 6 . 5 is of the fixed - grip design , utilizing a wedging system capable of hand - generated loads up to 2 . 5 tons
圖6 5所示的加載的夾具具有固定夾頭裝置，它利用了一個手動操作載荷可達到2 5噸的楔形系統。
The dcb ( double cantilever beam ) met hod to test the interlaminar toughness of fabric - reinforced laminates and the modified compliance calibration method ( mcc ) were adopted in this research . the double cantilever beam ( dcb ) test was executed for stitched laminates to evaluate the interlaminar fracture toughness . the stitch parameters ( stitch line spacing and pitch spacing ) were changed and their effects on interlaminar fracture toughness were examined by means of dcb test by using improved insert type loading fixture
試驗中采用改進的插入型夾具、雙懸臂梁dcb ( doublecantileverbeam )試驗方法，測試了載荷?試樣開口位移曲線，依據改進的柔度梁方法( modifiedcompliancecalibrationmethod ( mcc ) )計算出了各個試樣的層間斷裂韌性( r曲線)及層間斷裂韌性的平均值，闡明了縫合工藝參數與層間斷裂韌性( g _ ( ic ) )間的關系，以拉伸與彎曲強度為約束條件，以層間斷裂韌性值為目標優化了縫合工藝。